Sneak Peek: 24″ Speedco carbon frame

4 03 2016

While the “carbon footprint” of 20″ race frames shows no signs of slowing down, people racing cruiser have had to sit along the sidelines for a long time waiting for their turn.

Granted, Prophecy BMX does (did?) offer a carbon 24 but most of the major race outfits have been slow to offer a big wheel option to riders.

If you’re one of those riders anxious to get on a carbon 24….well, you’re wait is about to come to an end.

Speedco BMX has announced that they’re working on a 24” version of their VELOX carbon frame.

Details are very preliminary at this point — hence the 3D rendering — but plans are to get these babies out to riders in the fall of this year, 2016.

Speedco VELOX carbon frame

Time to start saving your pennies.

 





Spying a nice Stout build

1 03 2016

Matt at STOUT Bikes has been producing great custom frames (as well as forks and handlebars) out of his Texas shop for some time now.

We’ve featured his work before…Buddy Sardenga‘s super-cool Beelzebike, The 20 666’er was the first time…and more recently…Joshua “Lurch” Gittere’s custom 26-inch.

In both cases I was blown away by the build quality and attention to detail. Both owners were both pretty stoked on their respective bikes too.

And who could blame them? They’re both great bikes (I’ve ridden both.)

So the other day, I was surfing the net — flitting between bike sites — as I’m wont to do.

And I found myself over at the STOUT Bikes website.

After spending way too much time checking out all the custom frames, forks and bars, I caught myself checking out a build simply called “Ron’s 24”.

The bike looked huge!

I don’t know the specs but that front end appears plenty roomy.

The back end looks tight though…so it definitely looks like it would be great to shred on.

Rons Stout 24According to the writeup:

Ron is like eight feet tall. He is one of the guys I met in Oregon that helps build a kickass local dirt park. I hope he’s liking this thing better than that tiny P24 that he broke.

I’m super curious about the specs/geo now! If the other STOUT Bikes I’ve ridden are anything to go on (and I think they are) this is probably a rad bike to ride.

I hope I have a chance to test ride this bike some day.

Here’s a pic of the fork and bars.

Rons 24inch forks & barsDang…as if I’m not feeling those bars too!

If these pictures have whet your appetite for some more custom bike porn…mosey on over to the STOUT bikes website, I know you won’t be disappointed.





Curtis Bikes’ unconventional 24 in action

24 02 2016

Last month, we had the good fortune of checking out the unconventional custom cruiser that Curtis Bikes had built for one of their clients.

As you’ll recall, it featured a 22″ top tube, 14.9-15.3″ chain stays and 10 x 135 mm* dropouts set up to run  a Hope hub and Tech 3 disc brake.

*Spacing typically seen on MTBs

It was definitely a tricked out frame.

The blue finish was pretty slick too.

I was looking forward to seeing what it would look like all built up.

Well, as luck would have it…I popped over to the Curtis Bikes Facebook page and found a pic of the owner, Graham Stanley, putting it through its paces at the Manchester indoor track.

custom curtis cruiser in action Graham Stanley

Looking speedy!

 

 





La Casa rolls out 22 and 24″ wheel sets

17 02 2016

A few months back, Brink Distribution (a wholesale distributor in Canada), piqued our interest when they announced that they would be carrying both 22 and 24″ complete bikes from Encore in their product lineup.

When their Instagram feed lit up our phones in the last couple days with news that the 22″ Anthem and 24″ Coda were now in their warehouse, we got pretty excited.

Then today, we got the news that Brink would also be carrying La Casa wheels in both 22 and 24″ sizes!

La Casa 24inch wheelsThis is great news on a couple of fronts…first, it’s awesome to see another 24″ complete wheel option on the market and second, another 22″ option on the market is MAJOR!

With even fewer 22″ options on the market (vs. 24″) this development should see more people giving 22″ wheels a try…if only because they have the confidence that they can pick up aftermarket wheels if/when they need them.

In terms of specs, the wheel sets feature:

  • sealed bearings
  • double wall rims (front and back)
  •  14mm male rear axles
  •  3/8 front female axles (both front & back axles are solid chromoly).

They are sold in sets only.

Pretty stoked on this.





Sneak Peek: Another Tribute Bikes teaser

11 02 2016

We got the first photo tease of the new Tribute Bikes Prototype cruiser back in April.

They’ve been busy working on and testing the Prototype since then.

Today, Tribute released photos of the latest iteration of their new prototype frame.

Tribute prototype frame fork stemFor now, colors choices are going to be raw or black.

Tribute protype bottom bracketI’m digging this bottom bracket and chain stay junction.

Tribute prototype headtubeHead tube drilled for a Gyro.

Tribute prototype brake staysRemovable brake mounts.

Tribute prototype seat tubeClean welds.

Tribute prototype frames stemsLooks pretty dialed.

Did I mention that the front triangle is entirely Reynolds tubing?

No?

It is.

Nice.

The specs:

  • 74 degree head tube
  • 71 seat tube angle
  • 21.98″ top tube
  • 13″ bottom bracket
  • 14 mm dropouts
  • Removable brake mounts

The back end is designed to fit 2.25-2.30 tire.

And depending on the gearing you choose, you’re looking at a chain stay length of 14 to 14.125″. ( She’s got a tight rear end.)

I’m pretty stoked on this.

Can’t wait to see the final version.





Sneak Peek: 2016 DK Cygnus cruiser

21 01 2016

Ever since we got the first look at DK’s 2016 race cruisers, we’ve been waiting anxiously to get a peek at the more “freestyle-y” Cygnus cruiser.

Well, the wait is over.

The 24″ Cygnus comes in two color ways: Red/Black and Black/Gold.

What’s new this year?

The Cygnus gets an upgrade in the handlebars department.

Translation: bigger bars!

Sporting a healthy 8.25″ rise and 28″ width….these bars reflect how most folks are setting up their new school 24s these days.

Other spec is pretty much the same as previous years with the exception of the new parts brand, Wise, getting the nod for things like rims, brakes, stem, cranks, etc.

Back to the colorways

The Black/Red color way is very cool…a black fade to a dark red (You might call it “burgundy-ish“.)

Copyright DK Bicycles 2015

Copyright DK Bicycles 2015

The Black/Gold colorway is also very cool. If you appreciate that old school vibe you’re really going to dig the gold rims (and bars) on this version.

Copyright DK Bicycles 2015

Copyright DK Bicycles 2015

If these pictures have piqued your interest, go start bugging your DK dealer now. These should be dropping at the tail end of February.





Curtis Bikes’ unconventional cruiser

14 01 2016

I shared an early photo of this Curtis cruiser frame last week on the Cruiser Revolution Facebook page.

Curtis Bikes had taken an unconventional approach to this custom cruiser frame so my interest was definitely piqued.

Now, Curtis Bikes has released new pictures…and wow, this is a really cool looking frame.

curtis cruiserIt features a 22″ top tube, 14.9-15.3″ chain stays and 10 x 135 mm* dropouts set up to run  a Hope hub and Tech 3 disc brake.

*Spacing typically seen on MTBs

curtis cruiser dropouts and hub

Check out this brake bridge.

curtis cruiser brake bridgeI’m feeling this blue finish too.

curtis cruiser rear viewHere’s the rest of the specs:

  • Headtube angle: 73 degrees
  • Seattube angle: 69 degrees
  • Top tube length: 21, 212.5, 21.75″ and custom (like the one above)
  • Chain stays: 14.9 – 15.3″
  • Bottom bracket height: 12″ 
  • Frame height: 8″

curtis cruiser side view 2 Disc brakes on cruiser frames are still a bit of a rarity…and people seem to be a bit divided on whether or not they are the way to go…but I’m kinda digging it here.

Nice job by Curtis Bikes!

(Photos: Curtis Bikes)





Top ten of 2015

31 12 2015

So, we find ourselves here again…the end of the year.

As always, I like to take a look back at some of the top cruiser news on this, the final day of the year. (Granted, the list took a hiatus last year while I was away traveling…but it’s back now.)

So without further ado, the top ten.

10. The  refrain, “What’s old, is new again” is something that I found myself saying throughout the year. Case in point, Gary Turner’s return to the BMX world with a line of cro-mo frames…kicked off by the intro of a nice 26″cruiser frame.

9.  Redline came out with their “nod to the past” PL-26 cruiser. Aping the style of it’s iconic PL-24 cruiser, Redline capitalized on the current interest in 26″ cruisers and introduced a 26″ version.

8. As alluded to above, 26″ cruisers continued to enjoy their moment in the sun. Interbike had 26″ cruisers on display around every corner it seemed. Heck, Skyway even announced a 26″ T/A for 2016, so this trend seems like it will continue.

7. Colony surprised us with a well-spec’d new school 24″ cruiser. Nice to see another core company offering a big wheel option to riders.

6.  Summer 2015 might well go down as the Summer of the BMX movie. A surprising number of entertaining flicks were available to choose from. I caught Turbo Kid in the theater and was grinning from ear to ear the whole time.

5. After months of teasing, anticipation and finally the introduction of the 24″ Chase Hawk tire…people were stoked on this high-performance tire option. However, its swan song seemed to come way too fast (with the announcement that Odyssey was dropping Chase from its team). Whether Odyssey will continue to offer it under a different name remains to be seen.

4. Encore Bikes, an outfit out of Canada, introduced both a new school 24 and 22-inch complete to their lineup. Nice to see these models, right out of the gate, from the new face in the market.

3. BMX Plus!, the longest-running BMX magazine, announced it was shutting down. A blow for sure, especially in a year with so much focus on the old school and bikes like back in the day.

2. Stolen Bikes continued to do the big wheels right. Dialed completes, limited edition tan tires and solid components. It’s easy to see why so many folks are rollin’ on Stolen.

1.  The passing of Scot “The OM” Breithaupt shook the BMX world hard. The man who essentially wrote the template for BMX back in the day (and founded SE Bikes) was gone. News spread quickly, it trended on social media, and it had everyone reflecting on the man and his legacy. In the end, however, it seemed to remind us of how special BMX is, and what an important part Scot played in “making it happen.”

As I said in my post about Scot,

It’s up to us now to continue to make it happen…whether that’s holding a jam, piling into a car with friends for a BMX roadtrip or just getting out on a bike for some fun…we have to continue to make it happen.

BMX has done a lot of looking back this year…but on the eve of 2016, let’s look ahead to see what’s next…to that next turn, that next jump, that next pedal.

Cheers everyone…and Happy New Year!

 





An uncommon approach to the 24

30 12 2015

Commonground Bikes has taken a decidedly uncommon approach to spec’ing their flagship 24″ bike.

While many companies have followed the path (made famous by Sunday with the Model C) of building scaled up versions of their popular 20″ bikes.

Commonground opted to take the dimensions of a 26″ dirtjumper frame and scale it down to a 24″ package.

commonground

Along with that thinking comes a quite different handling bike.

Instead of a steep head angle and a high bottom bracket, you’ll find a slack head angle and a low bottom bracket.

24 cruiser vs commonground comparison

We’re talking a 69 degree head angle here…which is very slack by cruiser standards. Even race cruisers stay above the 72 degree threshold (Mike Wong’s Dialled cruiser excepted).

commonground 26-24

With spec’s like this, it seems like this would be right at home in the dirt (which is what PlusSizeBMX seems to have found when they took it for a spin).

Heck, I can see how these might gain some traction (pardon the pun) in some of the older cruiser classes…given its more predictable steering and lower, more stable stance.

Not sure how it would fare for more technical street/park type riding though.

An interesting concept for sure…and with FBM manufacturing the frames and S&M helping out with the bars and forks you know these babies are built to last.

What do you think?

(All pics/images: Commonground)





Race Inc. returns

2 12 2015

Race Inc., an iconic BMX brand, was a mainstay in the BMX world back in the late 70s to the early 80s.

Now, some 40 years later, Race Inc. is back with new modern race frames…all sporting the iconic Race Inc. logo of the past.

Race Inc logoIf you were at the Grands (or caught coverage of the Grands) you might have spotted some of the new Race Inc. frames on display during the race.

race inc frames grands

This has created a bit of buzz in certain circles…no doubt driven in part by old schoolers nostalgia for the brand.

Currently, the company is racing (see what I did there?) to update their website.

What we do know is that the frames will come in a range of sizes, including Cruiser.

In the mean time, they have posted the following update to their Facebook page:

We currently have a limited number of frames in various sizes, but have planned for an additional order that should arrive in February 2016. The cost will be $495.00, plus $20.00 shipping. They will come in red, silver, blue, black and gold anodized finish. Raw frames can also be requested.

24″ frames will come in following sizes: Pro, Cruiser, Pro XL Cruiser and Pro XXL Cruiser. Specific frame specifications will be on our website update.

I’m definitely looking forward to learning more about the new frames…and their specs/geometry.

race inc head tube badge

One more thing, take a look at these new head tube badges. Sweetness!