Advertisements

The Lord has risen – video edit incoming

31 07 2019

Early this year we learned that Dyno was making a comeback as a 29er ….and not only that, said 29er was going to be a Dave Voelker signature model.

Hot damn, one of my favorite riders from bitd back in the limelight and this time…on big wheels.

And now, Dave’s back with a new edit….and it’s so good!

It starts off with some classic footage of Dave going BIG….it’s almost like a highlight real from his biggest BMX hits. From there it segues into some superfun big wheel shenanigans…complete with the classic Voelker footplant.

Check it out:

It’s good to see Lord Voelker back.

The Lord has risen….Praise the Lord!

Advertisements




Dyno makes a comeback as a 29er

9 04 2019

If you were on Instagram over the weekend you will have already seen it.

The classic Dyno has risen from its 80s ashes as a 29″ Dave Voelker signature model.

Debuted at the Spring Fling event in Florida, by none other than “The Lord” Dave Voelker himself, it hits all the right Dyno cues: the traditional Dyno forks with the distinctive bend at the end, along with Power Series cranks and the classic Dyno pretzel bars.

Word on the street is that these will be dropping some time in June.

I have also heard that depending on how sales go, a 26″ may follow, and there is even a slim chance that if the 29″ and the 26″ (that is just a pipe dream right now) do well…a 24″ may follow.

All I can say to that is….I hope they sell like hot cakes….cuz I would absolutely love one of these in 24″!

Still dig this 29″ though…partly because I loved Dynos back in the day and partly because Dave Voelker is so bad ass.

Good to see both Dyno and Dave back…and looking so good.

 





When 29 inches is just not enough

5 03 2019

With so many companies jumping on the 29er bandwagon, it’s easy to see that the big wheel cruiser trend is showing no signs of slowing down.

But if you thought 29″ wheels were the top end of the cruiser world you may be in for a surprise.

Take a gander at the new Sixxer Cycles 36″ wheel bicycle.

That’s some big bicycle!

And check out this clip (from ORP BMX) showing a model wheeling out a Sixxer bicycle.

The model is in platform shows and the handlebars are near her chin!

This is some next level (next level height?) stuff.

Here’s another shot.

With all that being said, there’s not much more detail on these in terms of specs and geometry.

But….if you find a even a 29″ cruiser too cramped — if you’re that big and tall — this may be the bike for you.

Hit up ORP BMX for more details.





First look: Stolen Bikes Max 29″

29 11 2018

Perhaps this is the first “clear” look at Stolen Bikes‘ new 29″…since we first saw a cloudy pic of a teaser a few weeks ago (A new Stolen 29 sounds fine).

With that being said, we finally  have some more details — and a sharper picture — of what the new addition to the Stolen Bikes lineup will look like.

Dubbed the Max 29″, Stolen says they have taken what they have learned from building their bigger bikes (22, 24 and 26 inch) to make a 29er of equal caliber.

The Max 29″ is full cro-mo, with fully sealed components (with the exception of the pedals) and is built for abuse with double-wall wheels and a 14mm rear axle. Stolen’s parts brand, Fiction ,also covers the tire department with some sporty 29 X 2.50″ rubber.

Specs/Geo-wise, you’re looking at the following:

  • Top Tube Length: 23.25″
  • Chain Stay Length: 18″
  • Head Tube Angle: 71°
  • Seat Tube Angle: 72°
  • Seat Tube Height: 16.15″
  • Bottom Bracket Height: 12″

Color choices are: Black with Chrome Plated bits (pictured above) or Raw with Caribbean Green (not pictured…but I am intrigued by the “Caribbean Green…if only because it reminds me of a Billy Ocean song).

All in all, pretty deece.

No word yet on availability, so hit up Stolen Bikes if this new 29″ piques your interest.





A new Stolen 29 sounds just fine

20 11 2018

Stolen Bikes dropped a little teaser the other day regarding a new bike they have in the works.

The image was a bit cloudy…but the hashtag #29 was a bit more definitive.

Looks the  Saint XLT 24 and the Zeke XLT 26 are gonna have a 29″ big brother!

No word yet on specs, geo or release dates…but my interest has definitely been piqued.





First look: S&M 29″ Pounding Beer forks

9 08 2018

As surprising as it is to see a 29″ fork from S&M Bikes, this is legit!

Apparently despite the popularity of 29″ cruisers from SE Bikes, 29″ replacement forks are hard to come by.

Sensing a market opportunity, the guys at S&M stepped in (stepped up?) to answer the call. Sporting  similar styling and a name that’s reminiscent (or at least rhymes) with the iconic “Landing Gear” this is now available for order from Planet BMX.

Dubbed the “Pounding Beer” fork, it’s a bit tongue in cheek…but would you expect anything less from S&M?

Available in white, black or chrome-plated.

 

 

 





Ready for a 29″ GT Pro Performer?

21 07 2017

Well, what is this now?

Looks like GT wasn’t satisfied with upsizing the old school Performer to a 26er.

New for 2018, GT has gone and supersized the Pro Performer!

We’re talking 29″ wheels here folks.

I’m not sure if they’re trying to cash in on some of that 29″ following that the SE Big Ripper has been enjoying…but nevertheless it’ll be hitting BMX shops soon.

Personally, I dig the old school colorway. It’s got me thinking about digging up some old Eddie Fiola videos and reliving the golden era of freestyle.

Riding-wise though, I wish they would’ve gone with a 24″ version of the Performer with some new school geo…similar to what SE did with the 24″ Quadangle.

Now that’s something like that would get me interested!

In it’s present 29″ form though?

I’ll take a pass.