Nort and Wayne…loving life, loving what they do and loving each other.
Each of us should be so lucky.
(Don’t forget to get your sweetheart something for Valentine’s Day today.)
Nort and Wayne…loving life, loving what they do and loving each other.
Each of us should be so lucky.
(Don’t forget to get your sweetheart something for Valentine’s Day today.)
There’s a thread going on right now over on Vintage BMX discussing the pros and cons on installing rear fenders on race cruisers.
Yes my friends….fenders.
Turns out GHP racer Todd Parry is running a carbon fiber (?!) fender on his race cruiser to avoid “being sucked in between the tire and the seat”.
And while the different sanctioning bodies tend to frown on these kind of things, it appears that track operators are letting the use of fenders slide.
Seems a little goofy to me.
What do you guys think?
If you were on the Cruiser Revolution Facebook page over the Christmas holidays, you’re already in the loop on this.
If you weren’t, let me give you the scoop.
Back in 1982, Skyway came out with the T/A frame. T/A stood for “Totally Aerodynamic” and featured teardrop-shaped tubing that made it an instant classic.
It was widely available as a 20″ and Skyway was said to have produced thousands over the years that it was available.
However, despite the 20′s popularity, Skyway decided to only produce a 24″ version in limited quantities. You pretty much had to be a factory rider like Richie “The Avalanche” Anderson to get a hold of one of these puppies.
This kind of exclusivity has made them a much sought-after item for collectors. You either had to be extremely lucky or have deep pockets to get a hold of one of the 24″ Skyway T/As. (Being as hot as Eva Gabrielle didn’t hurt either.)
But now PlanetBMX and Skyway are working together to bring a 24″ Skyway to the masses. It’s going to stay true to the original classic design but have a few modern elements thrown into the mix.
Check out the specs:
I just love the look of these frames…especially the chrome ones. Throw on some black Tuffs and some skinwall tires and you’ve got a serious looking machine on your hands.
I went to a Supercross event a few years back and was impressed with how they started “the show”.
To kick things off they had:
It got me wondering why things like that hadn’t been incorporated into some of the bigger Nationals. Surely the ABA Grand Nationals, billed as the “greatest race on earth”, warrants this kind of treatment.
But year after year, it sames like just a slight variation of what’s gone on before. To be sure, the Grands is still a big deal and exciting to watch–if you’re into racing–but it lacks a certain “wow” factor.
Now compare clips of the Grands (or any other major race lately) to this clip of a recent race in St. Etienne, France.
This race has:
What else?
Stands packed with spectators.
This my friends, is what a National should look like.
(…and if we could add the Monster Energy girls into the mix…well, that couldn’t hurt either.)
If you caught the footage from the ABA Grandnationals this past weekend, you no doubt caught AA Pro Denzel Stein‘s scary crash caused by his carbon forks snapping.
Truth be told, I’ve never really been a fan of carbon forks and things like this are not making me any more comfortable.
Die-hard carbon fork fans claim that carbon is stronger than chromoly but you never seem to see this level of catastrophic failure with a steel fork.
And the lightness argument? The gap between a good-quality chromoly race fork and a carbon fork is so small these days it hardly seems worth it from a safety and price perspective (carbon forks are generally the more expensive than other types of forks).
Word on the street is that some how an insert/sleeve to strengthen the steer tube was not installed. That’s all well and good but if this kind of thing gets overlooked on a top pro’s bike…how many average joes are riding similar setups (without the insert/sleeve)? Seriously, it’s not worth the risk.
Ironically up until this year, Denzel was often seen running chromoly S&M forks on his factory Redline whip.
Did he make the switch due to pressure from his sponsor? Or maybe to cash in on co-sponsorship money? I wonder if he’s rethinking his decision and whether it was worth it.
BMX has lost a lot of things over the years.
Knobby tires.
Padsets.
The Jofa mouth guard.
But you know what else BMX has lost? The BMX moustache.
That’s right. There was a time when race bikes were chromoly and BMX racers rocked ‘staches.
Back in the day, the legend Perry “PK Ripper” Kramer, intimidated his competition and broke the hearts the hearts of trophy girls everywhere with his moustachioed swagger.
Later, Hollywood Mike Miranda would bring his All-American moustache to the silver screen with memorable scenes in the movie Rad (“Hollywood Mike Miranda makes his second dramatic exit of the day”)
Thankfully, the Movember fundraiser is in full swing and guys everywhere are growing moustaches to raise awareness and funds for men’s health. I’ve joined the cause and I’m donating my upper lip to the cause for the 30 days.
My moustache has already caused a few sideways glances at work, and some outright laughter when I’ve gone riding at the trails but it’s all for a good cause, to raise awareness and funds for prostate cancer. Which as many of you know, affected one of the icons of our sport, Stu Thomsen, in recent years.
If you’d like to support me in raising funds for this great cause (and bring a little moustachioed swagger back to BMX) you can donate to my campaign via this link: http://mobro.co/EdVandermolen.
Any support would be greatly appreciated. (Be sure to check out the Ron Burgundy and Tom Selleck tomfoolery on my Movember page as well.)
Can you believe it?
Cruiser Revolution hit the three-year mark this month.
Three great years of talking 24″ BMX.
Whether it’s sharing stories of guys getting back into BMX on a 24inch bike, checking out the latest bikes and parts, finding out what other riders are doing or just the random goofiness that pops up here from time to time…it’s great to be on this ride with you.
They say that time flies when you’re having fun and I guess it’s true in this case.
Thanks to everyone for their support.
I really appreciate all the great comments, discussion and general awesomeness from all the great people I’ve gotten to know through this blog.
Cheers to you.
Can’t wait to see what’s in store for the year ahead.
Just when you thought there’s nothing left on your bike that can be made lighter, Odyssey has gone out and developed a lighter brake cable.
That’s right, kids.
Wait.
Kids don’t ride brakes these days.
Anyway, back to what I was saying.
Odyssey has come out with a brake cable, called the Race Linear Slic Kable, that’s 37% lighter than other brake cables.
How you ask? They’ve taken their popular Linear Slic Kable housing and replaced the steel linear wire with an aluminum one.
I’m extremely curious to see how durable these cables are.
Will they stand up? It’s hard to say right now…they’re still pretty new. But I’m sure we’ll find out soon enough, especially when weight-conscious racers get wind of these.
I do like the added trick factor of the color-coated inner wires and ball ends though (something not available on the regular Linear Kables).
For more on the Race Race Linear Slic Kable, check out the Odyssey Daily Word on it.